Roadway safety reflective solar aluminum led road stud
|Payment Type:||T/T,D/P,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CIF,EXW|
|Delivery Time:||7 Days|
|Place of Origin:||guangdong|
Model No.: WDM-SGDD-3-R
Roadway Safety reflective solar aluminum led road stud
Roadway safety reflective solar aluminum led road stud
Solar studs are solar studs as charging components, batteries or capacitors as energy storage components, using led lighting or passive lighting combined stud products. The visual effect of solar road studs is much better than that of ordinary road studs, and its main features are the following two.
The main characteristics of solar road studs: First, the brightness of the light is large. The reflective brightness of ordinary reflective road studs is only 300MCD to 400MCD, while the luminous brightness of solar road studs can reach 2000MCD, which is 6 to 7 times that of the former. Such high-intensity light can penetrate rain and mist at night, and guide the driver safely and effectively. The second is: active light, dynamic warning. Solar spikes flash at a certain frequency at night, and its dynamic warning function is very strong. Active lighting can not only avoid the interference of rain and fog to the greatest extent, but also can make the driver's line of sight get rid of the dependence on car lights, and the visible distance is farther and the effect is better.
Related recommendations for double-sided 6-lamp Roadway safety reflective solar aluminum road stud:
1. Horseshoe-shaped solar road studs
2. Double-sided 6-lamp solar road stud
3. Single side 3 lights solar road stud
4. Round solar road studs, etc.
Detailed parameters of double-sided 6-lamp Roadway safety reflective solar aluminum road stud:
1. Product model: WDM-DD03-6Y
2. Product size: 132*122*75MM
3. Color of lamp beads: red, yellow, blue, green and white
4. Number of lamp beads: 6
5. Red wavelength: 620-625NM
6. Yellow wavelength: 590-595NM
7. Blue wavelength: 470-475NM
8. Green wavelength: 520-525NM
9. White brightness: 18900-22600MCD
10. Protection grade: IP68
11. Shell material: cast aluminum
12. Battery voltage: 1.2V
13. Solar panel: 2.5V
14. Working temperature: -40℃~60℃
15. Working mode: light control (often flashing / always on)
The characteristics of double-sided 6-lamp Roadway safety reflective solar aluminum road stud:
1. Double-sided 6-lamp solar column studs adopt 0.25W/2V monocrystalline silicon solar panels. Monocrystalline silicon is a relatively active non-metallic element. In addition to its general characteristics, it also has high purity and high solar energy conversion rate. The advantages.
2. The double-sided 6-lamp solar column studs are designed with aluminum shell, which is strong in impact resistance and durable. The solar panel is embedded in the aluminum frame, so that it can better absorb solar energy and will not be damaged by rolling.
3. Double-sided 6-lamp solar column studs use ultra-bright Taiwan wafer chip beads, eye-catching colors, clear colors, whether in the day or night has a good visual performance, which can cause drivers to drive Pay attention to reduce the speed of vehicles and improve the safety of driving on highways.
4. Double-sided 6-lamp solar column studs are available in a variety of colors, and the color of lamp beads and reflectors can be customized according to customer requirements.
5. Double-sided 6-lamp solar column studs have overcharge and over discharge protection functions.
6. Double-sided 6-lamp solar post with column has good waterproof and dustproof effect, and the protection level can reach IP68.
Installation steps of double-sided 6-lamp solar pillar studs:
1. Installation instructions for the double-sided 6-lamp Roadway safety reflective solar aluminum road stud:
Roadside line (not recommended to be installed in the middle of the road, to avoid excessive impact of the car and damage to the spike)
2. Installation steps for the Roadway safety reflective solar aluminum led road stud:
1> Positioning: first determine the installation position with a ruler to ensure that each position is on a straight line, the installation distance and the design requirements are subject to, the installation place should be flat, dry, clean and seamless.
2> Mixing glue: A glue for road studs, B glue for road studs, the ratio of A glue and B glue is 1:1 (for example: A glue 1 kg, B glue is 1 kg). The glue must be stirred evenly and the color should be the same.
3> Glue: The road surface should be cleaned during installation, and the glue should be moderate. Both the bottom surface of the road studs should be adhered to, and the overflow should not be too much. About 40-50 grams of glue should be used for each road stud, and the glue should be applied to the bottom surface of the road signs. Place on the pre-marked location. After installation, clear road debris.
4> Patrol: After two hours, the installed spikes should be checked again.
5> Road closure: It is recommended to close the road for 6 hours to ensure the curing time of the glue.
Shenzhen Wide Way Optoelectronics Co., Ltd.
ShenZhen Wide Way Optoelectronics Co.,Ltd is a professional manufacturer of LED traffic products .We are specilized in LED traffic signal lights ,arrow traffic lights ,solar road stud ,traffic countdown timer,ETC ,LED pixels cluster ,traffic guide lights .etcOur company culture is keep on science and technology innovation and we have our own research team to develop new intelligent traffic product with purpose "Keep the road more safety.Our competitive is professional and comprehensive, and we have our own factory ,so we can offer factory-direct price,strict QC before products shipping out .We also provide good after serive ,if any questions about the products or Others you can contact us freely , we will give you feedback in 24 hours.
- Company Name: Shenzhen Wide Way Optoelectronics Co., Ltd.
- Representative: LiSheng
- Product/Service: traffic light , traffic light module , led arrow board , outdoor led display , highway led traffic product , led speed limit sign
- Capital (Million US $): 5000000
- Year Established: 2011
- Total Annual Sales Volume (Million US $): Below US$1 Million
- Export Percentage: 51% - 60%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 6
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 5,000-10,000 square meters
- Factory Location: No. 2 Shenglian Road, Wulian Village, Fenggang Town, Dongguan City
- Contact Person: Ms. FionaHuang
- Tel: 86--13652406263
Premium Related Products